D&M Engineering.co.uk
On Line Store - Here
Check out our range of spares
and
parts availible online
seat       pvl 
revcounter   sprocket

Facebook - Follow us

 
facebook
 
{JFBCFollow href=https://www.facebook.com/dandmengineering layout=standard show_faces=true width=220 height=65 colorscheme=light kid_directed_site=true}
 D&M Engineering Honda 500/4
  RC 181 replica on the Dyno
Click here to see full size
Read here  Honda CB500-4 (RC181) 
 D&M Engineering Honda 250/4
  RC 162 replica on the Dyno
 

D&M Engineering offer a complete tuning service. D&M Engineering specialise in tuning classic
racing Honda four stroke machines, such as Honda CB350 K4, Drixton Honda CB450 and Honda
CB500 four race bikes.

D&M Engineering has been involved in preparing and tuning many different types of four stroke machines. These include Aermacchi, Bennelli, Ducati, Norton, AJS, JAP, Ariel,Triumph, BSA, Honda, Kawasaki, Suzuki & Yamaha.

D&M Engineering can carry out all the work to tune your engine to suit your requirements.D&M Engineering have worked on vintage, classic, post classic and modern 4-stroke engines fitted
with both 2 valves & 4 valves per cylinder. D&M Engineering have experience ontuning single cylinder,twin cylinder, three cylinder & four cylinder engines. 

D&M Engineering have a wealth of experience with other makes of machines. In the past D&M Engineering has been involved with, Greeves, Cotton 250 LCRS, Honda RS500 V3, Honda RS125,

Yamaha YZR 500 V4, Yamaha TZ 250/350, Yamaha RD 250/350LC two stroke race engines to
mention but a few.

With our partners D&M Engineering can also offer a bespoke exhaust service thanks to
NRP Exhausts.

D&M Engineering can also offer a full Dyno facility thanks to TorqueTune Dyno Centre.
With these partners D&M Engineering can offer a development service to get the best
possible results from your engine.

 
eng 024   eng 023
eng008   eng007
  eng009

 With our partners D&M
 Engineering can also offer a
bespoke exhaust service
 thanks
  to NRP Exhausts.

D&M Engineering can also offer
  a
full Dyno facility thanks to
 Torque
Tune Dyno Centre.With
these
partners D&M Engineering
can offer
a development service
 to get the
best possible results
from your
engine

 
 
  
D&M Engineering undertake all types of modifications to motorcycles. No job is to large or small and as motorcycle enthusiast D&M Engineering understand your requirements.

You may require modifications to your classic racer, café racer or classic bike that needs the attention of specialised equipment or machining. D&M Engineering are able to offer a range of services to help with making modifications to your motorcycle from Milling, Turning, Grinding, TIG welding, Gas welding & Fabrication work. With our partners we can also offer blasting, polishing, chroming, metal plating, anodising, painting & powder coating. This also includes hard chroming to repair pitted or worn forks.

If you require frame modifications, fitting a different engine to frame, special foot rest or putting different wheels into a chassis or any modifications give D&M Engineering a call to discuss your project.
  
d_mr013 d_mr0003 d_mr011  
d_mr0005 d_mr0008  

 

 

Engine rebuilds
 

Here at D&M Engineering we can rebuild all types of vintage, classic, post classic and modern engines. Although we mainly specialise and work on Honda engines which will be used for Classic Racing we have a great wealth of experience with many other types of engines.

D&M Engineering can carry out full and complete engine rebuilds for normal road use or a full race spec engine,we can also completely restore an engine to a high standard or to suit your requirements.

In our service page you will read that we offer crank re-building, re-bores, valve guide and valve seat replacement, valve seat cutting, helli-coils, welding and machining to complement any engine rebuild.   


D&M Engineering can carry out
 full and complete engine
rebuilds for normal road use
or a full race spec engine.
We can also completely restore
 an engine to a high standard
 or to suit your requirements.

eng003

eng017

In our service page you will
read that we offer crank
re-building,
 re-bores,valve
guide and valve seat
replacement, valve seat
cutting, helli -coils,welding
and machining to complement
any engine rebuild.

eng008

eng001
 
Here at D&M Engineering we can rebuild all types of vintage, classic, post classic and modern engines
 Although we mainly specialise and work on
Honda engines
CB250/350K, CB350/4, CB400/4,
CB450/500T, CB500/4 and CB750/4,
 which will
be used for Classic Racing
 we also have a great wealth of experience with
many other types of engines
  
eng003
     

 Classic racing motorcycle rebuilds and restorations
D&M Engineering specialise in classic motorcycles

 CB350 K4 Classic racing  TAB Honda CB350 K4 classic racer CB350 K4 Honda TAB classic race bike on the work bench
d_mr0006 Honda production racer 007 d_mr0004
Pictured here top row a TAB Honda CB350K4 classic race bike being built and prepared at the D&M Engineering workshop.
The classic racing Honda had a full race spec D&M Engineering engine fitted and the TAB Honda was race prepared by D&M.
 
 

For Sale Latest Ads